GE PHB920 Owner's Manual

Also see for PHB920: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

24 49-80695-1Usegloves orclothReceptacleG9 BulbSocketTabGlass coverReceptacleMaintenanceCARE AND CLEANING: MaintenanceSHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electricalpower to the range at the main fuse or circuit breaker panel. Failure to do so may resultin electric shock or burn.WARNINGBURN HAZARD: The glass cover and bulb should be removed when cool. Touching hotglass with bare hands or a damp cloth can cause burns.CAUTIONOven Light Replacement (on some models)To remove:1. Turn the glass cover counterclockwise 1/4 turn untilthe tabs of the glass cover clear the grooves of thesocket. Wearing latex gloves may offer a better grip.2. Using gloves or a dry cloth, remove the bulb bypulling it straight out.To replace:1. Use a new 120/130-volt halogen bulb, not to exceed50 watts. Replace the bulb with the same type of bulbthat was removed. Be sure the replacement bulb israted 120 volts or 130 volts (NOT 12 volts).2. Using gloves or a dry cloth, remove the bulb from itspackaging. Do not touch the bulb with bare fingers.Oil from skin will damage the bulb and shorten its life.3. Push the bulb straight into the receptacle all the way.4. Place the tabs of the glass cover into the grooves ofthe socket. Turn the glass cover clockwise 1/4 turn.For improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool.5. Reconnect electrical power to the oven.Oven Light Replacement (on some models)To remove:1. Turn the glass cover counterclockwise 1/4 turn untilthe tabs of the glass cover clear the grooves of thesocket. Wearing latex gloves may offer a better grip.2. Remove the bulb by turning it counter-clockwise.To replace:1. Replace bulb with a new 40-watt appliance bulb.Insert the bulb and turn it clockwise until it is tight.2. Place the tabs of the glass cover into the grooves ofthe socket. Turn the glass cover clockwise 1/4 turn.For improved lighting inside the oven, clean the glasscover frequently using a wet cloth. This should bedone when the oven is completely cool.3. Reconnect electrical power to the oven.