GE Profile P2S975SEMSS Installation Instructions Manual

Also see for P2S975BEMBB: Owner's manual

Contents

c. Front right burnerMake sure the holein the burner headassembly is positionedover the electrode andthat the burner headis fully inserted insidethe burner base. Asmall gap betweenthe base and headis normal.Front leftburner, backright burnerand back leftburnerMake surethe slot in theburner head ispositioned overthe electrode.The burner caphas three to four pins. When placing the cap,make sure none of the pins sits in the stabilitychamber.d. Place the burner grates over the burners.COOKTOP BURNERSASSEMBLE THE BURNERSCAUTION: The electrode of thespark igniter is exposed. Be careful not topush any cooktop controls while the topof the burner is removed. Do not removethe top or touch the electrode of any burnerwhile another burner is turned on. Electricalshock might result.a. Place the burner head onto the burnerbase, making sure that the head is properlyoriented over the burner base and theelectrode. Make sure to place the correctburner head on the correct burner baseand that the burner head sits level on theburner base. The burner heads are notinterchangeable.b. Place the burnercaps on the burnerheads, making sureto place the correctburner cap on thecorrect burner head.The burner caps arenot interchangeable.Make sure that theburner caps areproperly seated onthe burner heads.A2415Installation InstructionsBurner capBurner headBurner baseElectrodeBurner capBurnerheadBurner baseElectrodeStabilitychamberBurner cap not properly seatedBurner cap properly seatedMediumheadFront of rangeLarge headSmall headExtra large head