GE Profile PFSS6NKW Technical Service Manual

Contents

– 14 –REPLACING THE REFRIGERATOR DOORSInstall the center hinge on each side.Lower the refrigerator door onto the center hingepin. Ensure that the plastic hinge pin thimble ison the center hinge pin or inside door hinge pinhole located in the bottom of the door.Securely tape the door shut with masking tapeor have a second person support the door.ABCREMOVE THE REFRIGERATORDOORS (cont.)Lift the door straight up to remove.Remove the two hex-head bolts and two Phillips-head screws from the center hinge. Set the hinge,bolts and screw aside.IHREPLACING THE REFRIGERATORDOORS (cont.)Insert the top hinge pin into the hinge hole ontop of the refrigerator door. Make sure the dooris aligned with the cabinet and opposite door.Attach the hinge to the top of the cabinet. Donot tighten bolts completely.On left-hand doors, pass the wires and water linethrough the top hinge pin. Then connect thewater line and two connectors.Attach the ground wire with a Phillips-headscrewdriver at the right and left hinge.Make sure the gasket on the door is flush againstthe cabinet and is not folded. Make sure the dooris straight and the gap between the doors is evenacross the front. While holding the aligned doorin place, tighten the top hinge bolts.Reconnect the two connectors at each side of thetop cap and reattach the three Phillips-headscrews on top.EFGDH