GE Profile PFSS6NKW Technical Service Manual

Contents

– 15 –Removing the Freezer Door(Continued next page)REMOVE THE FREEZER DOOR (cont.)Use the tip of a screwdriver to separate the railfrom the rail cover. Tilt the front end up and liftthe entire door.Set the door front on a nonscratching surface.Push the rail assemblies back into the cabinet.CAUTION: Push both sides of the railassemblies back at the same time.EFGREPLACING THE FREEZER DOORTwo people may be required to completethis procedure.ATTACH AND SECURE THE DRAWERFRONT TO THE SLIDESPull out the rail assemblies to the full length oneach side of the cabinet.CAUTION: Make sure to pull out theside rails evenly.A1REMOVE THE FREEZER DOORPull the freezer door open to full extension.Remove the freezer bin by pulling both bracketsupward at the same time. (See page 8.)Take out the lower basket by lifting the basket upfrom the rail system. (See page 10.)Remove the two 10 mm hex-head bolts from theright and left side.ABCD