Chapter 11. RX7i PLC Monitoring Via the Web200 PACSystems* RX7i & RX3i TCP/IP Ethernet Communications User Manual GFK-2224QRX7i Home PageThe RX7i home page is displayed after entering the PLC CPU’s URL or IP address at your web browser. From thePLC home page, you can navigate to the other PLC web pages.Factory Default Web PageIf the PLC home page file (index.htm) is not present in the Ethernet Interface file system, the web server insteaddisplays the factory default web page.Figure 83: PACSystems Factory Default Web PageThe default web page is displayed in English, French, German and Spanish if the browser is configured to useWestern European encoding.Reference Tables Viewer PageThe Reference Table s Viewer page shows the current states of a range of data references. This data is asnapshot of the PLC Reference Tables when the data was initially requested. It is NOT updated until you refreshthe display. All RX7i reference tables are available.Selecting Reference Table DataInitially, the previously-viewed reference table is displayed. To change the display, you can:Select Reference Table Data Row-by-Row: The right column of each row contains the configuration options forthat row. For each row, select the reference table, starting address, and data format. You can select the %R,%AI, %AQ, %I, %Q, %M, %T, %G, %S, %SA, %SB, %SC, %P, %L, or %W reference table. For %P and %L memorytypes, specify the logic program name, and for %L memory, the subroutine block name. The logic program andsubroutine block names must be reentered when defining other rows.To select the data format, click on a reference table address cell above the reference value and select thedisplay format type. For example:Figure 84: Selecting Display FormatTo format a row, click the Format button for the entire row. Use the drop down box to select the data format forthe selected reference address or row. With Internet Explorer, pressing the “OK” button changes the formatimmediately. With Netscape, the format changes after you refresh the screen.
