Automatic RoastingAuto Roast uses the temperatureprobe to cook to the desiredserving temperature. UnlikeTemp Cook/Hold, which uses asingle power level, Auto Roast= up to 3 power settings whichautomatically switch duringroasting, thus providing even,tender cooking resulb withoutovercooking.Just as in conventional roastin~, —2. At 90°F., display switches toshow meat’s internal temperature.only tender roasts should be A~to Place pork roast in cooking bagRoasted until specified internal and place in microwave-safe dish.temperatures are reached. Lesstender roasts should be microwavedby time, according to the cookbookm@which comes with your oven.Reparing Roas& forAuto RoastingPlace tender beef roast in cookingbag on trivet in microwave-safedish. (Refer to manufacturer’sinstructions for proper use ofcooking bag.) Inse~ probe throughcooking bag horizontally into thecenter meaty area not touchingbone or fat. Make sure the handledoes not touch the food or top orsides of the oven.3. Rice during cooking programoven will signal and “TURn” willflash if codes 1 through 5 have beenselected. Open the door and turnthe meat over. The probe may bedisconnected from the receptaclefor easier turning of the meatPlace meat in oven with probe to without interrupting the program.the right. Insert cable end of probe (Remember tore-insert the probe.)u ,COOKING GUI :“”; ~D DOOR1. Touch AU~ ROAST pad.“AUTO” appears on display and“ENTER CODE” flashes. Touchnumber pad 2. “CODE 2“ appearson display and “START” flashes.Touch START. Display showstemperature and “CODE 2:’display. Oven monitors internalfood temperature; automaticallyswitching to lower power as meat’stemperature rises. This helpsprevent toughening or overcooking.5. After find temperature is reached,oven switches to Hold temp for upto 1 hour, then shuts off.244