GE Spacemaker PDW1800N Install Manual

Also see for PDW1800NBB - Profile 18-in Dishwasher: Owner's manual Energy guide Dimensions and installation information

Contents

GE Spacemaker PDW1800N Install Manual Manual pdf 6 page image

Installation PreparationPREPARE ELECTRICAL WIRING#282 FrenchFOR PERSONAL SAFETY:Remove house fuse or open circuit breakerbefore beginning installation. Do not usean extension cord or adapter plug with thisappliance.#282 FrenchThe improper connection of the equipmentgrounding conductor can result in electricshock. Check with a qualified electrician orservice representative if you are in doubt thatthe appliance is properly grounded. Do notmodify the plug provided with the appliance;if it will not fit the outlet, have a proper outletinstalled by a qualified technician.For models equipped with power cord: Do not modify the plugprovided with the appliance; if it will not fit the outlet, have aproper outlet installed by a qualified technician.Cabinet Preparation and Wire Routing• The wiring may enter the opening from either side, rear or thefloor within the shaded area.• Cut a 1-1/2" max. diameter hole to admit the electrical cable.Cable direct connections may pass through the same holeas the drain hose and hot water line, if convenient. If cabinetwall is metal, the hole edge must be covered with a bushing.Note: Power cords with plug must pass through a separatehole.Electrical Connection to DishwasherElectrical connection is on the right front of dishwasher.• For cable direct connections the cable must be routed asshown in Figure E. Cable must extend a minimum of 24" fromthe rear wall.• For power cord connections, install a 3-prong grounding typereceptacle in the sink cabinet rear wall, 6" min. or 18" max.from the opening, 6" to 18" above the floor.4Figure EWARNINGWARNINGElectrical Requirements• This appliance must be supplied with 120V, 60Hz., andconnected to an individual properly grounded branch circuitprotected by a 15 or 20 ampere circuit breaker or time delayfuse.• Wiring must be 2 wire with ground and rated for 75°C (176°F).• If the electrical supply does not meet the aboverequirements, call a licensed electrician before proceeding.Grounding Instructions–Cable DirectThis appliance must be connected to a grounded metal,permanent wiring system, or an equipment groundingconductor must be run with the circuit conductors and beconnected to the equipment grounding terminal or lead on theappliance.Grounding Instructions–Power Cord ModelsThis appliance must be grounded. In the event of a malfunctionor breakdown, grounding will reduce the risk of electric shockby providing a path of least resistance for electric current.This appliance is equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug mustbe plugged into an appropriate outlet that is installed andgrounded in accordance with all local codes and ordinances.1-1/2” Dia.Hole (Max.)3”fromCabinet24”from WallGroundBlack White