GE UR Series Manual

Also see for UR series: Instruction manual Instruction manual Instruction manual Release notes

Contents

3-122 UR SERIES – COMMUNICATIONS GUIDEMODEL IMPLEMENTATION CONFORMANCE STATEMENT (MICS) CHAPTER 3: IEC 61850 COMMUNICATION33.5.6 General (Gen) logical deviceThe Ctrl logical device contains logical nodes that model UR FlexLogic, Virtual Outputs, non-volatile latches, FlexElements,and recording (for example, oscillography) functions.The Ctrl logical device is available when the Advanced IEC 61850 option is purchased with the UR device.3.5.6.1 Logical node zero (LLN0)LLN0 is instantiated in all UR series devices implementing the Gen logical device.Table 3-109: LLN0 data objects3.5.6.2 Data logger (DatLog)This element is instantiated in the following products: C30, C60, C70, D60, F35, F60, G30, G60, L30, L60, L90, M60, N60, T35,T60.Table 3-110: Data logger data objectspulseConfig.numPlsINT32U 1 RctlModel CtlModels CF EnrMtrMMTR1.RsStat.ctlModel 1, the code for direct control with normalsecurity; 2 is code for SBO with normalsecurity.R/W/CsboTimeout INT32U CF 30000 RsboClass SboClasses CF 0 (operate-once) RoperTimeout INT32U CF 0 RInRef1 ORG CLEAR ENERGY setting. RsetSrcRef ObjectReference SP setting reference to clear Energy,which shows the receiving ofdynamically clearing signal forenergy calculationReference to the data attribute to input R/CsetSrcCB ObjectReference SP Source GoCB of input if via GOOSE R/CLNName: LLN0 LDevice inst: Gendata obj. data attribute Type FC UR Name Description R/W/CNamPlt LPL Logical node Prot configurationinformationRvendor VISIBLESTRING255DC Mapped to LPHD1/PhyNam.vendor RswRev VISIBLESTRING255DC Mapped to LPHD1/PhyNam.swRev RconfigRev VISIBLESTRING255DC Gen configRev The factory default value is the emptystringRldNs VISIBLESTRING255EX IEC 61850-7-4:2007B RGrRef ORG Reference to the next higher-levellogical device (LD)RsetSrcRef ObjectReference SP In communications, the Master ldNamesetting if not empty, otherwise theconcatenation of the IED name and“Master”.In SCL, the concatenation of the IEDname and “Master”.RLNName: DatLogRDRE1 LDevice inst: Gen UR element: Data Loggerdata obj. data attribute Type FC UR Name Description R/W/CFltNum INS Fault number RLNName: EnrMtrMMTR# LDevice inst: Meter UR element: Signal Source # Energy Meteringdata obj. data attribute Type FC UR Name Description R/W/C