GE Multilin L60 Line Phase Comparison System 6-36 ACTUAL VALUES 6.2 STATUS66.2STATUSFor status reporting, ‘On’ represents Logic 1 and ‘Off’ represents Logic 0.6.2.1 CONTACT INPUTSPATH: ACTUAL VALUES Ö STATUS Ö CONTACT INPUTSThe present status of the contact inputs is shown here. The first line of a message display indicates the ID of the contactinput. For example, ‘Cont Ip 1’ refers to the contact input in terms of the default name-array index. The second line of thedisplay indicates the logic state of the contact input.6.2.2 VIRTUAL INPUTSPATH: ACTUAL VALUES Ö STATUS ÖØ VIRTUAL INPUTSThe present status of the 64 virtual inputs is shown here. The first line of a message display indicates the ID of the virtualinput. For example, ‘Virt Ip 1’ refers to the virtual input in terms of the default name. The second line of the display indicatesthe logic state of the virtual input.6.2.3 REMOTE INPUTSPATH: ACTUAL VALUES Ö STATUS ÖØ REMOTE INPUTSThe present state of the 32 remote inputs is shown here.The state displayed will be that of the remote point unless the remote device has been established to be “Offline” in whichcase the value shown is the programmed default state for the remote input. CONTACT INPUTSCont Ip 1OffRange: On, OffMESSAGE Cont Ip 2OffRange: On, Off↓MESSAGE Cont Ip xxOffRange: On, Off VIRTUAL INPUTSVirt Ip 1OffRange: On, OffMESSAGE Virt Ip 2OffRange: On, Off↓MESSAGE Virt Ip 64OffRange: On, Off REMOTE INPUTSREMOTE INPUT 1STATUS: OffRange: On, OffMESSAGE REMOTE INPUT 2STATUS: OffRange: On, Off↓MESSAGE REMOTE INPUT 32STATUS: OffRange: On, OffNOTE
