GE WH00X5630 Part Instruction

GE Appliances & LightingPart Instruction WE49X20697GE Appliances & LightingGeneral Electric CompanyLouisville, KY 40225GEAppliances.comWH00X5630The drum slide assembly is located on theback side of the front panel and utilizes 4drum slides. Two white outer slidesWE1M504 are used as guides, and 2 greencenter (top) slides WE1M1067 are used tosupport the weight of the drum.Caution: Do not replace the center (top)support slides WE1M1067 with the whiteguide slides WE1M504. Damage to thedryer will result.To remove the drum slide topbearing assembly:1. Remove the light bulb (if present).2. Grasp the top of the drum slidebearing assembly and pull down andinward to release the assembly fromthe 2 tabs located at the top of thefront panel.3. ReassembleDrive BeltThe drive belt WE12M22 is a 4-rib belt andextends from under the motor pulley, overthe top of the idler pulley, and around theperimeter of the dryer drum. Belt tension ismaintained by the idler pulley and drivenby a pulley attached to the motor shaft.To remove the drive belt:1. Reach under the left-hand side ofthe drum, push the idler pulleydown and to the right, and lock theidler arm on the top corner of themotor bracket to release belttension.

/ 3

Related manuals for GE WE12M29