TOOLS YOU WILL NEED: Phillips head screwdriver 5/16" and 1/4" nutdriver 6" Adjustable wrench Level Carpenters square Measuring tape Safety glasses Flashlight Bucket to catch water when fl ushing the line GlovesFor New Installations Only: Tubing cutter Drill and appropriate bits Hole saw setPhillipsHeadScrewdriverInstallation PreparationPARTS SUPPLIED: Two #8 Phillips fl at head wood screws, 5/8" longto secure dishwasher to underside of countertop(in literature package). Two Phillips head, color matched toekick screws(in literature package).MATERIALS YOU WILL NEED : Ferrule, compression nut and 90° Elbow (3/8"NPT externalthread on one end, opposite end sized to fi t water supply) Thread seal tape UL Listed wire nuts (3)Materials For New Installations Only: Air gap for drain hose, if required Waste tee for house plumbing, if applicable Electrical cable or power cord, if applicable Screw type hose clamps Strain relief for electrical connection. Hand shut-off valve Water line 3/8" min. copper Coupler for extending drain line, if applicable90° Elbow,Ferrule andCompression NutWire Nuts (3)Waste TeeElectrical Cable(or Power Cord, if applicable)Hot Water lineScrew TypeHose ClampsCouplerHandShut-OffValve2 Wood ScrewsHole Saw SetMeasuring TapeTubing CutterDrill and Bits1/4"and 5/16" Nut-driverSafety Glasses6" AdjustableWrenchBucketFlashlightGlovesCarpentersSquareLevel2ThreadSeal TapeAir GapStrain Relief2 Color MatchedToekick Screws