Gaggenau BO 450 610 Use And Care Manual

Also see for BO 450 610: Installation instructions

Gaggenau BO 450 610 Use And Care Manual Manual pdf 10 page image

10Colors and displayColorsThe various colors serve to guide you in the variousadjustment situations.PresentationThe presentation of symbols, values or the entiredisplay changes depending on the situation.Automatic door openingWhen you touch the ! symbol, the appliance doorsprings open and you can open it fully with the handlerecess at the side.Automatic door opening does not work when the childlock is activated or in the event of a power failure. Youcan open the door manually with the handle recess atthe side.Additional information ( and )By touching the ( symbol, you can call up additionalinformation. For example, information on the heatingfunction set or on the current temperature of thecooking compartment.Note: During continuous operation, small fluctuationsin temperature are normal after the oven has heatedup.The ) symbol is displayed for important informationand action prompts.Important information on safetyand operation mode are occasionally shownautomatically. These messages either disappearautomatically after a few seconds or must beconfirmed with ™.Cooling fanYour appliance has a cooling fan. The cooling fanswitches on during operation. Depending on theappliance version, the warm air escapes above orunder the door.After removing cooked food, keep the door closeduntil the appliance cools down. The appliance doormust not be left ajar, as adjoining kitchen furnituremay be damaged. The cooling fan continues to run fora while and then switches off automatically.9 CAUTIONDo not cover up the ventilation slots. Otherwise,the appliance will become overheated.Orange First settingsMain functionsBlue Basic settingsCleaningWhite Adjustable valuesZoom The display of the setting you are justchanging is enlarged.Just before it elapses, a duration that isjust elapsing is enlarged (e.g. the last60 seconds in the case of timers).Minimizeddisplay screenAfter a short time, the display screen isminimized and only the most importantthings are displayed. This function is thedefault and can be modified in the basicsettings. )