Gaggenau BSP2511 1 Series User Manual And Installation Instructions

Before using for the first time en133. When inserting the cooking container, ensure thatthe lug is facing upwards.Note: To completely pull out the accessories, lift themslightly.Remove any accessories that you do not require fromthe cooking compartment.Before using for the first time6 Before using for the first timeClean the appliance and accessories.6.1 Initial useImplement the settings for initial use before using yourappliance.First read the information under safety → Page 2.The appliance must be installed and connected.After connecting the appliance to the power supply, theGAGGENAU logo appears for approx. 30 seconds andthen the appliance displays the "Initial settings" menu.You can configure your new appliance for initial use.The "Initial settings" menu appears only after the appli-ance has been connected to a power supply andswitched on for the first time, or if the appliance hasnot been connected to a power supply for a number ofdays.You can change all of the settings in the basic settings→ Page 25.Setting the languageRequirement: The display shows the preset language.1. Use the rotary selector to select the required displaylanguage.2. Press to confirm.Setting the time formatRequirement: The display shows the possible formats24h and AM/PM. 24h is preset.1. Use the rotary selector to set the required format.2. Press to confirm.Set the timeRequirement: The display shows the time.1. Use the rotary selector to set the required time.2. Press to confirm.Setting the date formatRequirement: The display shows the possible formatsD.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.1. Use the rotary selector to set the required format.2. Press to confirm.Setting the dateRequirement: The display shows the preset date. Thedaily setting is already active.1. Use the rotary selector to set the required day.2. Press to switch to the month setting.3. Use the rotary selector to set the month.4. Press to switch to the year setting.5. Turn the rotary selector to set the year.6. Press to confirm.Setting the temperature unitRequirement: The display shows the possible units °Cand °F. The unit °C is preset.1. Turn the rotary selector to set the required unit.2. Press to confirm.Ending the initial useRequirement: The display shows "Initial set-up com-plete".▶ Press .a The appliance switches to standby mode.a The display shows the standby screen.a The appliance is ready to use.Fitting the grease filter▶ Hook the enclosed grease filter → Page 7 onto thetwo bolts on the back wall of the cooking compart-ment.‒ Do not scratch the back wall of the cooking com-partment.Cleaning the door paneNote: To ensure tightness, the door seal is lubricatedat the factory. Residue may remain on the door pane.▶ Before using for the first time, clean the door panewith glass cleaner and a window cloth or a mi-crofibre cloth.Do not use a glass scraper.Cleaning accessories▶ Before first use, clean the accessories thoroughlyusing hot soapy water and a soft cloth.Heating up the appliance1. Ensure that there is no leftover packaging in thecooking compartment.2. Remove any accessories from the cooking compart-ment.