Gaggenau BSP2511 1 Series User Manual And Installation Instructions

Long-term timer en17Delaying the cooking time endRequirements¡ The food is in the cooking compartment.¡ You have set the type of heating, temperature andcooking time.1. Press .2. Use to select the "Cooking time end" function.3. Use the rotary selector to set the required cookingtime end.If flashes, set the cooking time first.4. Press to start.a The appliance switches to standby.a The display shows the operating mode, temperat-ure, cooking time and cooking time end.a The appliance starts at the calculated time and auto-matically switches off once the cooking time haselapsed.a After the cooking time has elapsed, flashes and asignal tone sounds.5. Press , open the appliance door or set the func-tion selector to .a The signal tone stops.Changing the cooking time end1. Press .2. Use to select the "Cooking time end" function.3. Use the rotary selector to set the required cooking-time end.4. Press to start.Cancelling the entire procedure▶ Turn the function selector to .Long-term timer9 Long-term timerWith this function, the appliance uses the Hot air + 0%humidity type of heating to keep the temperaturebetween 50 °C and 230 °C.You can keep food warm for up to 74 hours withouthaving to switch the appliance on or off.Bear in mind that food which spoils easily should notbe left in the appliance for too long.9.1 Starting the long-term timerRequirement: The long-term timer is set to "Available"in the basic settings → Page 25.1. Turn the function selector to .2. Press .a The display shows the default value 24h at 85 °C.3. Press and use the rotary selector to set the re-quired cooking time.4. Press and use the rotary selector to set the re-quired cooking time end.5. Press , use the rotary selector to set the requiredswitch-off date, and press to confirm.6. Use the rotary selector to set the desired temperat-ure.7. Press to start.a The appliance starts the long-term timer.a The display shows and the temperature.a The interior lighting and the display lighting areswitched off.a The control panel is locked.a If you touch the control panel, no signal tonesounds.a Once the time has elapsed, the appliance no longerheats up and the display goes out.8. Turn the function selector to .9.2 Switching off the long-term timer▶ Turn the function selector to .Childproof lock10 Childproof lockActivate the childproof lock so that children cannot ac-cidentally switch the appliance on or change the set-tings.If the childproof lock is switched on and the powerfails, the childproof lock can be deactivated when thepower comes back on.10.1 Activating the childproof lockRequirements¡ You can set the childproof lock to "available" in thebasic settings → Page 25.¡ The function selector is set to .▶ Press and hold for approx. 6 seconds.a The display shows the standby screen and .a The childproof lock is activated.10.2 Deactivating the childproof lockRequirement: The function selector is set to .1. Press and hold for approx. 6 seconds.a The childproof lock is deactivated.2. Set the appliance as normal.