Gaggenau BX 481 112 Instruction Manual

Gaggenau BX 481 112 Instruction Manual Manual pdf 19 page image

19Long-term timer enTo terminate the whole procedure:Set the function selector to 0.Setting the time functions for bothovens simultaneouslyTimer and stopwatch are not available if both ovens arein operation.Cooking time and Cooking time end can be setsimultaneously for both ovens.Set a heating function and temperature for both ovens.Use Q or R to select the desired oven and set thecooking time.If a cooking time has been set for only one oven, thesettings are shown on the left-hand side of the display.The Q or R symbols indicate whether the settings applyto the main or top oven.Example: It is 12:00. A cooking time of 45 minutes hasbeen set for the main oven. The cooking time finishes at12:45.The P symbol is used to call up the overview. You canselect the main or the top oven here.If a cooking time was set for both ovens, the overviewshows the settings for the main oven on the left and thesettings for the top oven on the right-hand side of thedisplay:FLong-term timerLong- termtimerWith the appliance in hot air mode, this function keepsthe temperature between 50 and 230 °C.You can keep food warm for up to 74 hours withouthaving to switch the appliance on and off.Bear in mind that food which spoils easily should not beleft in the oven for too long.Note: To use the long-term timer, you will need to set itto "available" in the basic settings. ~ "Basic settings"on page 25Setting the long-term timer1 Turn the function selector to ž. To set the long-term timer for both ovens, turn both functionselectors to ž .2 Touch the / symbol.The default value 24 hrs at 85 °C appears in thedisplay. Touch I to start- or -Change the cooking time, cooking time end, switch-off date and temperature.3 To change the 6 Cooking time:Touch the $ symbol. Set the desired cooking timeusing the rotary selector.4 To change the 5 Cooking time end:Touch the C symbol. Use the rotary selector to setthe desired cooking time end.5 To change the q Switch-off date:Touch the C symbol. Use the rotary selector to setthe desired switch-off date. Confirm with ™.6 To change the temperature:Use the rotary selector to select the desiredtemperature.7 Press I to start.The appliance starts. / and the temperature appear inthe display.The oven and display lighting are switched off. Thecontrol panel is locked; no key tone sounds when youtouch the touch keys.43344 55/RQJWHUPWLPHU