Gaggenau RC 462 Installation Instruction

Also see for RF 411: Installation instruction Installation instruction Installation instructions Installation instructions Installation instruction

Contents

Gaggenau RC 462 Installation Instruction Manual pdf 26 page image

2615. Checking that the finger protector moveseasilyIt is now essential to check that the finger protector moveseasily. At a later time any required corrections will be moredifficult.Note:The supplied finger protector can be used for both sides ofthe door hinge.Because of different installation possibilities, the fingerprotector has to be shortened to the required length. Shorten the finger protector at the upper side abovethe covering strip by 55 mm (1.). Push the offcut on the hinge side into the gapbetween the appliance and cavity wall.The part has to be easy pushing and pulling (2.)!Ensure smooth running at all positions of the door (3.).16. Connecting the appliance to the watersupplym Caution!Do not kink the hosepipe when bending, otherwisethere is the risk of water damage and leakage.Supplied, is a flexible hose for a domestic mainsconnection ¾”. Care should be taken that the ealingelements supplied are fitted to the appliance and the shut-off valve! Remove the plugs from the appliance connection (1.). Lay the water hose such that it ends at the applianceconnection (2.). Slide the union nut and the sealing element onto thewater hose. Attach the water hose to the appliance connectionand screw on the union nut (3.). Screw tightly, usingmanual force. Screw the union nut tightly using the fixed spanner.Do not over tighten! Push water hose back as far as possible into theprotective pipe (4.). Turn the shut-off valve and the main water tap.