29 Fasten the base panelling.Note:If necessary, the base strip can also be screwed to the basepanelling. Pre-drilled screw holes are located in the basepanelling in the area of the Velcro strip.18. Switching the appliance onThe appliance should now be switched on for the first timein order to ensure that the following installation stages canbe carried out accurately and that the kitchen units havethe correct appearence. Open the appliance door. Actuate the appliance’s on/off button.Only for appliances with a water connection:To avoid the risk of damage from water leaking outif the water pipe has been damaged, keep the shut-offtap closed.19. Preparing the furniture doorsImportant note:When working on the furniture doors, care should be takento the following:– Always carry out screwing jobs on the most stablepart of the furniture door. Never screw into fillingsor similar areas.– Always selects screws with a length smaller thanthe thickness of the cabinet front.– Protect the surfaces of the furniture doors duringinstallation against damage.The overall weight of the furniture door including the handleshould not exceed the following values:* Wine storage cabinetAligning the furniture doorThe furniture doors are attached to the appliance withthe fastening elements located on the appliance.By using these fastening elements, the furniture doorcan be adjusted accurately and securely attachedto the appliance.Function of the various parts:1. Threaded rod on the adjusting rib:for adjusting the furniture door vertically.2. Fixing bracket:for adjusting the cabinet frontage in terms of depth.3. Nuts on the threaded rod:for securing the cabinet front in order to preventlateral sliding.4. Lower fixing bracket:for securing the cabinet front in order to prevent lateralsliding.AppliancewidthOverall width of the furnituredoor45.1 cm 20 kg (8,5 kg *)60.3 cm 25 kg (14.5 kg *)75.6 cm 29 kg