Gaggenau RX492 Installation Instructions Manual

Contents

2512. Aligning glass doorsVertical alignmentThere are spacer washers fitted between the anglebrackets of the hinges and of the glass door. The glassdoor can be adjusted vertically by swapping the spacerwashers around.The total number of spacer washers must remain thesame:Door of the right climate zone: 6 spacer washersDoors of the left climate zones: 4 spacer washers! Warning!The glass doors are very heavy.It requires two persons to remove and align theglass doors.! Warning!The glass edges are easily damaged by knocks orspot loading.Always handle glass doors with great care and onlyset them down on a soft surface.1. At the top, unscrew the setscrew for horizontaladjustment.A second person must be holding the glass doorsecure.2. At the bottom, unscrew the screws from the anglebrackets.3. At the top, unscrew the screws from the anglebrackets.4. Pull the glass door out between the angle bracketsand set it down carefully on a soft surface.5. At the top and bottom, unscrew the angle bracketsfor horizontal adjustment.6. Reposition the spacer washers:A repositioning of one spacer washer corresponds toa glass door adjustment of 1mm downwards orupwards.When you fit the spacer washers, their holes mustbe concentric in relation to the tapped holes in theglass door.To adjust the glass door upwards:Remove spacer washers at the top and fit them atthe bottom.To adjust the glass door downwards:Remove spacer washers at the bottom and fit themat the top.

/ 27

Related manuals for Gaggenau RW496