Gaggenau RX492 Installation Instructions Manual

Contents

3Table of ContentsSafety and warning notes 4. . . . . . . . . . . . . . . . . .Installation notes 5. . . . . . . . . . . . . . . . . . . . . . . . . .Installation location 5. . . . . . . . . . . . . . . . . . . . . . . . . .Climate classes 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installation niche 5. . . . . . . . . . . . . . . . . . . . . . . . . . . .Floor surface 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Weights 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transporting the appliance 6. . . . . . . . . . . . . . . . . . .Transporting previously installed appliances 6. . . . .Electrical connection 6. . . . . . . . . . . . . . . . . . . . . . .Location of the power socket 6. . . . . . . . . . . . . . . . .Dimensions of the appliance 7. . . . . . . . . . . . . . . .Fully integrated built−in appliance 7. . . . . . . . . . . . . .Free−standing appliance 7. . . . . . . . . . . . . . . . . . . . .Dimensions of the installation niche 8. . . . . . . . .Dimensions of the kitchen unit doors 8. . . . . . . .Handles 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Weight of the kitchen unit doors 9. . . . . . . . . . . . . . .Height of the ventilation opening 9. . . . . . . . . . . . . .Door opening angle 10. . . . . . . . . . . . . . . . . . . . . . . .Clearance from the appliance to the handle of theadjacent kitchen unit 10. . . . . . . . . . . . . . . . . . . . . . . .Clearance from the appliance to the wall 10. . . . . . .Required tools and accessories 11. . . . . . . . . . . . .Scope of delivery 11. . . . . . . . . . . . . . . . . . . . . . . . . . .Accessories 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tools 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Miscellaneous 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fitting the appliance 12. . . . . . . . . . . . . . . . . . . . . . .1. Pre−installation checks 12. . . . . . . . . . . . . . . . . . .2. Removing the packaging, transportation locksand wooden palette 12. . . . . . . . . . . . . . . . . . . . .3. Fitting the anti−tip stabiliser 15. . . . . . . . . . . . . . .4. Connecting the appliance to the mains 16. . . . .5. Aligning the appliance 17. . . . . . . . . . . . . . . . . . .6. Fitting the appliance into the kitchen counter 187. Fitting the kitchen unit doors 19. . . . . . . . . . . . . .8. Setting up the appliance as a free−standing unit(RW496 only) 21. . . . . . . . . . . . . . . . . . . . . . . . . . .9. Removing the anti−tip stabiliser 23. . . . . . . . . . . .10. Fitting the base panel 23. . . . . . . . . . . . . . . . . . . .11. Adjusting the opening angle of theappliance doors 24. . . . . . . . . . . . . . . . . . . . . . . .12. Aligning glass doors 25. . . . . . . . . . . . . . . . . . . . .