Gaggia VELASCA PRESTIGE User Manual

Also see for RI8263: User manual

15English8 Place a large container (1.5 l) under the coffee and milkdispensing spouts.9 Press the OK button to start the descaling cycle.- The machine dispenses the entire descaling solution at regularintervals through the coffee and milk dispensing spouts (thistakes approximately 25 minutes).10 Wait until all of the descaling solution has been dispensed.Remove and empty the container and the milk carafe.11 Remove and empty the drip tray. Slide the drip tray back intothe machine.12 Rinse the water tank and fill it with fresh water up to the CALCCLEAN indication. Slide the water tank back into the machine.13 Fill the milk carafe with fresh water up to the MIN level andplace it back into the machine. Place the container back underboth spouts.14 Press the OK button to start the rinsing cycle (this takesapproximately 4 minutes).- The display shows the following icon to indicate that the rinsingcycle is finished.15 Rinse the water tank and place the water filter back into thewater tank (if it was installed).16 Fill the water tank with fresh water up to the MAX level. Slidethe water tank back into the machine.17 Press the OK button to end the descaling cycle.18 Place a container under the coffee and milk dispensing spouts.19 The display shows the following icon to indicate that themachine is heating up.- The machine performs an automatic rinsing cycle.20 Remove and clean the milk carafe see chapter ‘Cleaning andmaintenance’, section ‘Weekly cleaning of the milk carafe’.Insert the water dispensing spout into the machine.21 Remove and empty the drip tray. Slide the drip tray back intothe machine.22 Remove and rinse the brew group see chapter ‘Cleaning andmaintenance’, section ‘Clean the brew group’.The machine is now ready for use.CALCCLEAN4219_460_3729_1_booklet_A5_v1.indd 15 14/02/17 08:58