Gaggia VELASCA PRESTIGE User Manual

Also see for RI8263: User manual

16EnglishInterruption of the descaling cycleOnce the descaling cycle has started, you must complete it tillthe very end without turning off the machine. In case you getstuck during the cycle or in case of power failure or accidentaldisconnection of the power cord, you can exit by pressing thestandby button. If this occurs, empty and rinse carefully the watertank, then fill it up to the CALC CLEAN level. Follow the instructionsin chapter ‘First installation’, section ‘Manual rinsing cycle’ beforebrewing any beverage. If the cycle was not completed, the machinewill require another descaling cycle to be performed at your earliestconvenience.Cleaning and maintenanceWeekly cleaning of the brew groupClean the brew group once per week.1 Remove the coffee grounds container and open the servicedoor.2 Remove the coffee residues drawer.3 To remove the brew group, press the lever and pull the brewgroup out of the machine.4 Rinse the brew group with fresh water and let it air dry.5 To place the brew group back, make sure that the lever is incontact with the base of the brewing unit.Note: If it is not in contact with the base, push it down.124219_460_3729_1_booklet_A5_v1.indd 16 14/02/17 08:58