Gaggia VELASCA PRESTIGE User Manual

Also see for RI8263: User manual

9EnglishFirst installation1 Slide the drip tray with drip tray cover into the machine.2 Remove the water tank.3 Fill the water tank to the MAX level with fresh water.4 Fill the coffee bean hopper with coffee beans.5 Insert the small plug into the socket located on the back of themachine. Insert the power plug into the electrical outlet.Note: The display reminds you have to insert the hot waterdispensing spout. If not present, press on both sides of the hotwater dispensing spout and insert it into the machine until youhear a click.6 Place a container under the hot water and coffee dispensingspouts.7 Press the STANDBY button.8 Press the OK button to start the automatic circuit priming cycle.- The machine performs an automatic rinsing cycle.9 Remove the water tank from the machine, empty it.10 Fill the water tank with fresh water and place it back into themachine.11 Continue with the next step: the manual rinsing cycle.Manual rinsing cycle1 Place a container under the coffee dispensing spout.2 Press the AROMA STRENGTH button to select pre-groundcoffee. Do not add pre-ground coffee.3 Press the ESPRESSO LUNGO button. The machine startsdispensing water.4 When the machine stops dispensing, empty the container.Repeat steps 1-3 twice.5 Press the SPECIAL DRINKS button. Place a container under thehot water dispensing spout.6 Press the UP/DOWN buttons to scroll through the options ofthe display. Press the OK button to select ‘hot water’.- The display reminds you have to install the hot waterdispensing spout (if not present), press the OK button toconfirm.7 Press the OK button to start hot water dispensing.- Dispense water until the display shows the no water icon.8 Fill the water tank with fresh water up to the MAX level andremove the container.The machine is ready for use.4219_460_3729_1_booklet_A5_v1.indd 9 14/02/17 08:58