G&G WatchBot User Manual
                                            | |
Contents
| 
14WatchBot Home Security Camera - User Guide2 Setting up your camera for access viathe InternetUp to now, we have covered setting up your WatchBot camera on your local network (LAN).Here, we will look at accessing the camera from the Internet, so that wherever you are, youcan access the live video feed from your camera. (For extra information, see Appendix A).2.1 Setting up Network SettingsYour WatchBot camera needs an IP (Internet Protocol) address in order to appear on your localnetwork and subsequently to be accessed via the Internet.2.1.1 Click ‘Administrator’ tab on right, then go to ‘Basic Network Settings’This page allows you to either manually enter the network details (these would be availablefrom your Internet Service Provider), or in most cases, obtain these details from the DHCP(Dynamic Host Configuration Protocol) server.Note: If in doubt, try DHCP first, as in many cases this will work by assigning your cameraan IP address automatically. Please contact your Internet Service Provider if you are stillexperiencing any difficulty.Once DHCP box is checked:2.1.2 Once this is set, then go to ‘UPnP Settings’Check the box next to ‘Use UPnP to Map Port’, then click ‘Submit’. (This may be pre-set for you).On completing these steps, your camera is now available to be accessed over the Internet. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine