Vers. No. 6.146 Released: 25/04/20174 Connecting the modules → Q.bloxx A101: Connecting sensors and I/O4.8 Q.bloxx A101: Connecting sensors and I/OThe Q.bloxx Module A101 has two electrically isolated analoginputs and two digital inputs or outputs. The pin assignment ofthe two connector strips is identical and the connection terminalshave numbers for identifying the connections.GND identifies the measurement ground of an input, 0 V and +Vrefer to the (external) supply voltage connections. Measurementground and (module) supply voltage are electrically isolated inthe module.Fig. 4-18 Pin assignment for Q.bloxx Module A101.TipFurther information on transducers and sensors can also befound in Chapter 6 ff. page 135.4.8.1 VoltageWith voltage measurements two connection variants are possible,depending on the level of the voltages to be measured: up to 10 Vand up to 60 V.4(5)2 (+)37 (GND)610110 1Plug 1Plug 2Uup to 10 Vup to 60 V3 (+)7 (GND)U1 (+)7 (GND)I3 (+)7 (GND)234234 (–)3 (+)120 Ω 350 Ω641641IEPE7 (GND)8 (+)Din Dout10+V0V1025341 60 V2 UF3 AIn 14 AIn 25 AIn 36 AIn 47 GND8 IEPE9 TEDS10 DIO1 60 V2 UF3 AIn 14 AIn 25 AIn 36 AIn 47 GND8 IEPE9 TEDS10 DIOrequires Q.bloxxTerminal CJC
