Q.seriesGantner Instruments GmbH 694 Connecting the modules → Q.bloxx A108: Connecting sensors and I/O4.15 Q.bloxx A108: Connecting sensors and I/OThe Q.bloxx Module A108 has eight electrically isolated analoginputs and two digital inputs and outputs. The pin assignment ofthe two connector strips is identical and the connection terminalshave numbers for identifying the connections. You will find theassociated figures in each case at the same place in the circuitdiagrams, for example each of the figures quoted in the secondplace belong to one possible connection method.The designations 0 V and +V refer to the (external) supply volt-age connections. Measurement ground (–) and the (module) sup-ply voltage are electrically isolated in the module.Fig. 4-60 Pin assignment for Q.bloxx Module A108.TipFurther information on transducers and sensors can also befound in Chapter 6 ff. page 135.4.15.1 VoltageYou can measure voltages of up to 10 V.U3, 5, 7, 9 (+)4, 6, 8, 10 (–)I3, 5, 7, 9 (+)4, 6, 8, 10 (–)Din Dout1+V0V21 DIn2 DOut3 AIn 1+4 AIn 1–5 AIn 2+6 AIn 2–7 AIn 3+8 AIn 3–9 AIn 4+10 AIn 4–1 DIn2 DOut3 AIn 1+4 AIn 1–5 AIn 2+6 AIn 2–7 AIn 3+8 AIn 3–9 AIn 4+10 AIn 4–10110 1Plug 1Plug 2
