Garland SCO-GS-10S Installation, Operation And Maintenance Manual

Contents

Part Number 4530588 1/15 7DIMENSIONS AND SPECIFICATIONS“D”TOP VIEW38"[965mm]25-3/8"[645mm]54-9/16"[1386mm]3/4" N.P.T.GAS INLET3/4" REARGAS INLET1" REARGAS INLET7-3/4"[197mm]2"[51mm]3/4"[19mm](includesmotor)FLUE: 2-3/8" x 5"[60mm x 127mm]38-1/4"[972mm]11-1/2"[292mm]17-3/4"[451mm]1-1/4"[32mm]32-1/8"[816mm]34"[864mm]SINGLE DECKFRONT VIEW6-1/4"[159mm]DOUBLE DECKFRONT VIEW32-1/8"[816mm]32-1/8"[816mm]1-1/4"[32mm]32-1/8"[816mm]32-1/8"[816mm]14-3/4"[375mm]35-7/16"[900mm]Notes:1. Standard electrical specifications include motor requirements.2. (120V units) 115V 3/4 HP, 2-speed motor; 1140 and 1725 rpm60Hz.3. A 6 ft. line cord is provided for each 120V deck with a (NEMA#5-15P) plug.4. A separate 15 AMP circuit for each 120V unit is recommended.Instillation Notes:Combustible & Non-CombustibleWall Clearances:Sides 1" (25mm) Back 3" (76mm)Entry Clearances: inch (mm)Crated 44-1/2 (1130) Uncrated 32-1/2 (826)Model Int. Dimensions :In (mm) Ext. Dimensions: In (mm) Ship Wt Ship Dim.W H D W H D Lbs/kg Cubic Ft.SCO-GS-10S 29 (736) 24 (610) 24 (610) 38 (965) 57-1/2 (1461) 41-1/4 (1048) 515 / 230 64SCO-GS-20S 29 (736) 24 (610) 24 (610) 38 (965) 70-1/2 (1791) ** 41-1/4 (1048) 1030 / 465 128SCO-GS-10-ESS 29 (736) 24 (610) 24 (610) 38 (965) 57-1/2 (1461) 41-1/4 (1048) 515 / 230 64SCO-GS-20-ESS 29 (736) 24 (610) 24 (610) 38 (965) 70-1/2 (1791) ** 41-1/4 (1048) 1030 / 465 128** Height with legs or with standard casters. Height with low profile casters (double deck) is 68-1/2” (1740mm).Models Input Ratings Operating Pressure * ElectricalSpecificationsBTU/hr kW Equiv. Gas Inlet Natural Propane 120V/1Ph.SCO-GS-10S Natural &Propane53 000 15.53 (1) @ 3/4" NPT 4" WC(10 mbar)10" WC(25 mbar)(1) @9.8ASCO-GS-20S 106 000 31.06 (1) @1" NPT (2) @9.8ASCO-GS-10-ESS NaturalGas53 000 15.53 (1) @ 3/4" NPT 4” WC(10 mbar) n/a (1) @9.8ASCO-GS-20-ESS 106 000 31.06 (1) @1" NPT (2) @9.8A*Maximum Pressure 13.8" WC @ 70°F (21°C).Many local codes exist and it is the responsibility of the owner and installer to comply with those codes.These appliances are intended for commercial use by professionally trained personnel.