Garmin 101 Owner's Manual

Also see for 101: Owner's manual Quick start guide Features Owner's manual Installation instructions

Contents

8Satellite PageSatellite PageSatellite Page OptionsAdvanced SkyviewUsing the Satellite PageThe Satellite Page shows the Foretrex 101 gathering all the necessary satellite informa-tion in order to work. The Satellite Page shows you the satellites being acquired (in anima-tion), satellite signal strength, and the Foretrex 101 unit’s estimated location accuracy.When the message on the Satellite Page no longer reads “Acquiring...”, the Foretrex 101has found your location and you are ready to go!NOTE: If you are using your Foretrex 101 for the first time, have moved over 500miles from the location you last used your Foretrex 101 unit, or have not usedyour Foretrex 101 in more than one month, allow time for the unit to track satel-lites by leaving it outside with a clear view of the sky for 15 to 30 minutes.Using the Satellite Page OptionsPress the ENTER button to display the Satellite Page Options.Setup Display: Press ENTER when ‘SETUP DISPLAY’ is highlighted to open the DisplaySetup Page. Refer to the next section for information about the Light Timeout and Contrast.Advanced Sky View: Press ENTER when ‘ADVANCED SKYVIEW’ is highlighted to switchthe animation to the advanced sky view that displays two circles with numbers indicatingthe satellites the unit is acquiring. The bars on the right side of the page indicate the signalstrength of each satellite. When the unit is set to display the Advanced Sky View Page,you can set the orientation of the map by toggling between Orient Sky Ahead and OrientSky Northward. Toggle back to the normal sky view by pressing the ENTER button when‘NORMAL SKYVIEW’ is highlighted.About Foretrex: Press ENTER to display the software version and copyright information.Main Pages