26Main Menu Pages Projecting a WaypointUsing the Project waypoint feature, the Foretrex 101 can create a waypoint at a specifieddistance and bearing using an existing waypoint as a reference. You can also change thewaypoint name, symbol, and elevation on this page.To project a waypoint:1. Select a waypoint from the list on the Waypoints List Page and press the ENTER buttonto display the Review Waypoint Page.2. Use the UP or DOWN button to highlight ‘OPTIONS’ and press ENTER.3. Use the UP or DOWN button to highlight ‘PROJECT’ and press ENTER to display theProject Waypoint Page, which shows the numeric name assigned to the new waypointand with the distance field highlighted.3. Press the ENTER button to display the Edit Number Page. Select the digit you wish tochange and press the ENTER button to display the drop-down number list.5. Press the UP or DOWN button to highlight the correct number and press the ENTERbutton. When all numbers are entered correctly, highlight ‘OK’ and press the ENTERbutton.6. Use the DOWN button to highlight the bearing field and press the ENTER button todisplay the Edit Angle Page. Use the same method to enter an angle.The name, symbol, and elevation can be changed on this page as well.7. When all changes have been made, highlight ‘OK’ and press the ENTER button to savethe waypoint.8. Highlight ‘GOTO’ and press the ENTER button to begin direct navigation to thewaypoint.Waypoints Menu PageWaypoint OptionsProject Waypoint PageEdit Number Page