49Main Menu PagesDistance/Speed, Elevation, and Vertical SpeedThe Foretrex 101 allows you to customize speed and distance readouts.To change the Distance/Speed, Elevation, or Vertical Speed:1. Press the PAGE button until the Main Menu Page is displayed. Use the UP and DOWNbuttons to highlight ‘SETUP’ and press ENTER.2. Use the UP and DOWN buttons to highlight ‘SET UNITS’ and press ENTER.3. Press the UP or DOWN button to highlight the specific unit (‘DISTANCE/SPD’,‘ELEVATION’, or ‘VSPD’) and press the ENTER button.4. Use the UP and DOWN buttons to highlight the desired unit measurement and pressENTER.5. Press the PAGE button to return to the Main Menu Page.DefaultsYou can easily set the Foretrex units back to the default settings.To set the units to the defaults:1. Press the PAGE button until the Main Menu Page is displayed. Use the UP and DOWNbuttons to highlight ‘SETUP’ and press ENTER.2. Use the UP and DOWN buttons to highlight ‘SET UNITS’ and press ENTER.3. Press the UP or DOWN button to highlight ‘DEFAULTS’ and press the ENTER button.Setup Menu: Set UnitsSet Units PageSelecting the Map Datum