106 Rino ® 130 Owner’s ManualAPPENDIX > GPS TROUBLESHOOTING GUIDEGPS Troubleshooting GuideSymptom Probable Cause RemedyUnit does not turn on. Batteries are exhausted. Replace batteries.Unit does not turn on, even with new batteries. Batteries may be installed backwards. Reinstall batteries.You are pressing and releasing the Power button. You must press and hold the Power button for 2 seconds.The unit turns on, then turns off. Batteries may be nearly exhausted. Replace batteries.It takes more than ten minutes to get a location fix The unit’s view of satellites is obstructed. Move to a locatin with a clear view of the sky.Cannot access a WAAS system satellite after 2 to 5minutes.Your view of the satellite is obstructed or you arelocated too far from satellites currently in service for theAmericasMove to a location with a clear view and point the unitantenna in the direction of the satellite.System GPS operation is set to something other thanNormal and/or interface setting is set for RTCM.Set system GPS to Normal and interface to other thanRTCM. Or simply turn off WAAS.Cannot obtain a differential position from WAAS You have not collected enough information from theWAAS satellite.Wait 10–20 minutes for the initial collection, then 1–2minutes afterwards.Cannot access Point of Interest, Street, or IntersectionFind Lists.MetroGuide map data is not activated. Access the Map Setup Map option and activate the checkbox.Cannot view a track being laid down on the mappage when traveling.The Track Log feature is turned off. Access the Tracks Page, highlight the On button and pressthe Thumb Stick In.Cannot see the panning arrow on the Map Pageeasily.There is too much map clutter or the scale is such thatmap features are too densely displayed.Use the Map Page Setup Page to reduce map clutter orchange the map scale.Cannot exit a menu or page by moving the ThumbStick to the Left.Some menus and pages have an “X” (Exit) on-screenbutton in the upper right corner.Highlight the on-screen button and then press the ThumbStick In.