Rino ® 130 Owner’s Manual 35U NIT OPERATION > N AVIGATION PAGEUsing Sight ‘N GoTo use Sight ‘N Go to navigate:1. Use the Page button to access the NavigationPage and then use the Thumb Stick to accessthe Option Menu .2. Use the Thumb Stick to highlight Sight ‘N Goand press In. Note that the compass ring withpointer is in-line with the two sighting marks onthe case.3. Hold the Rino 130 at eye level and line up the twosighting marks on the case with the distant object.Press the Thumb Stick to Lock Direction.4. To navigate to your destination, select Set Courseand press the Thumb Stick. Begin traveling toyour destination using the pointer as a guide.To view your destination as a waypoint, selectProject Waypoint and press the Thumb Stick. Tore-sight the destination, press the Thumb Stick Inwhen Re-Sight is highlighted.Rino 130 held levelfor Sight ‘N GoSighting MarksCalibrating the CompassThe Electronic Compass must be calibrated outdoorswhen you first use the Rino 130 and after new batterieshave been installed. The accuracy of the ElectronicCompass is adversely affected if the unit is not held levelor is held near items that generate magnetic fields, such ascars, large belt buckles, etc.
