Rino ® 130 Owner’s Manual 87U NIT OPERATION > SETUP PAGESSystem Setup PageThe System Setup Page allows you to change GPSoperation modes, use the WAAS capabilities, turnthe Message Beep and compass on or off, choose thebattery type, and set the altimeter calibration settings toautomatic or manual. See the “Appendix” for WAAScapability information.To access the System Setup page:1. Press the Page button or the Menu icon toopen the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the System icon to open the System Setuppage.The Option Menu allows you restore defaults ordisplay the current version of unit operating software andthe Unit I.D. Number. Softwareupdates and instructions fordownloading are available fromthe Garmin Web site(www.garmin.com).Choose one of the four GPS options other than Normalto significantly save battery power. The Battery Savermode reduces the rate of satellite signal position updatingand the GPS Off option stops satellite signal receptionaltogether. The Demo Mode simulates navigation.To change the battery type:1. Use the Thumb Stick to highlight the BatteryType field and then press In.2. Then use the Thumb Stick to select the desiredoption and press In.System Setup Page
