Garmin 4000 Series Owner's Manual

Also see for GPSMAP 4000 Series: Configuration guide Quick reference guide Owner's manual Owner's manual Template manual

Contents

Garmin 4000 Series Owner's Manual Manual pdf 10 page image

GPSMAP 5000 Series Owner’s ManualGettInG StartedGettInGstarted To insert the SD card, open the access door and press it in until it clicks.GPSMAP 5008 or 5208To remove the SD card, press in on the card. The card pops out.Restoring Factory SettingsYou can restore your unit to the original factory settings.CAuTION: This procedure deletes any information you have entered.To restore factory settings:1. From the Home screen, touch Configure > System > System Information > FactorySettings > Reset.2. Touch OK to restore all factory settings or touch Cancel.Viewing System InformationYou can view your unit’s software version, basemap (built-in map) version, unit ID number, andyour XM WX weather radio ID (if available). You may need this information to update the systemsoftware or purchase additional map data information.From the Home screen, touch Configure > System > System Information.Using the Simulator ModeSimulator mode turns the GPS receiver off for use indoors or for practice. The unit does not tracksatellites in simulator mode.CAuTION: Do not try to navigate using simulator mode because the GPS receiver is turned off.Any satellite signal strength bars shown are only simulations and do not represent the strength ofactual satellite signals.To turn on Simulator Mode1. From the Home screen touch Configure > System > Simulator.2. Touch On to turn the simulator mode on. Touch Setup to set speed, track control, position,simulator time, and simulator date.Card label