Garmin 4000 Series Owner's Manual

Also see for GPSMAP 4000 Series: Configuration guide Quick reference guide Owner's manual Owner's manual Template manual

Contents

Garmin 4000 Series Owner's Manual Manual pdf 22 page image

GPSMAP 5000 Series Owner’s ManualuSInG chartSusInGchartsWrap—continuously records the track log, wrapping through the available memory(replacing the oldest track data with new data).Interval—defines the frequency at which the track plot is recorded. Recording more frequentplots is more accurate, but fills the track log faster.Interval—sets whether the interval is determined by distance, time, or resolution. (PressChange to set the quantity.)Distance—records the track based on a distance between points.Time—records the track based on a time interval.Resolution—records the track plot based on a variance from your course. This setting isrecommended for the most efficient use of memory. The distance value is the maximumerror allowed from the true course before recording a track point.Change—Sets the value of the interval.Color—sets the color of the track plot.To edit or delete a saved track:1. From the Home screen, touch Information > User Data > Tracks > Saved Tracks.2. Touch the track you want to edit or delete.3. Touch Edit Track to change the name or color of the track or to delete it.Using Fishing ChartsUse the fishing chart for a detailed view of the bottom contours and depth soundings on the chart.Fishing Chart Navigation ChartThe fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision SD card,and is best for offshore deep-sea fishing.Enabling High ResolutionHigh Resolution Satellite ImageryYou can overlay high-resolution satellite images on the land, sea, or both portions of the Navigationchart when using a preprogrammed BlueChart g2 Vision SD card.To enable satellite imagery:1. While viewing the Navigation Chart, touch Menu > Chart Setup > Appearance > Photos.2. Touch one of the following:Off—standard chart information is shown on the map.Land Only—standard chart information is shown on water with photos overlaying the land.Blend—photos overlay both the water and the land at a specified opacity. The higher youset the percentage, the more the satellite photos cover both land and water.•••••••••••