Garmin 4000 Series Owner's Manual

Also see for GPSMAP 4000 Series: Configuration guide Quick reference guide Owner's manual Owner's manual Template manual

Contents

Garmin 4000 Series Owner's Manual Manual pdf 67 page image

GPSMAP 5000 Series Owner’s Manual appendIXappendIXInitializing Unit SettingsThe first time you turn your unit on, you must configure a series of initial settings. These settingsmust also be configured when restoring factory settings (page 4). All of these settings can beconfigured later from the Configure screen.The settings are as follows:language—Touch the language that you want shown on your screen.Welcome—Touch OK.Any NMEA devices?—Touch yes if NMEA devices are or will be connected.AIs Connection (shown if answer to Any NMEA devices was yes)—Touch the type of AISdevices that are or will be connected to the unit. See page 32 for more information.Position Format—Specify the coordinate system that you want location readings to appearin.Time Format—Specify whether you want the time displayed in a 12-hour, 24-hour, or UTC(Universal Time Code) format.Time Zone—Specify the time zone for your location.units—Specify units for onscreen measurements as statute, Metric, or Nautical.Minimum safe Depth—Specify the minimum safe depth for your boat. Refer to your boatspecifications for more information.Minimum Overhead Clearance— Specify the minimum overhead clearance for your boat.Refer to your boat specifications for more information.Zone Alarm (shown if an AIS Connection is indicated)—Touch Yes if you want to set zonealarms (page 44).Zone Distance (shown if answer to Zone Alarm is Yes)—Touch the distance within whichyou would like a zone alarm to sound.Zone Time (shown if answer to Zone Alarm is Yes)— Touch the distance within which youwould like a zone alarm to sound.•••••••••••••