Garmin 4000 Series Owner's Manual

Also see for GPSMAP 4000 Series: Configuration guide Quick reference guide Owner's manual Owner's manual Template manual

Contents

Garmin 4000 Series Owner's Manual Manual pdf 53 page image

GPSMAP 5000 Series Owner’s Manual uSInG radarusInGradarRadar Overlay Screen OptionsTo access additional settings or options for the radar overlay screen, touch Menu. There are two setsof options you can access, radar or chart. The radar setup options are the same as the radar cruisingscreen (page 44). Touch Adjust Chart > Chart setup to access the chart options. The chart optionsare the same as the navigation chart (page 6). Touch Radar setup to access the radar setup options.Changing Radar SettingsTo change radar settings from the Home screen, touch Radar > Radar setup, or touch Menu whileviewing the radar cruising screen or radar overlay screen and then touch Radar setup.Orientation—changes the perspective of the radar display:Heading up—sets the radar display to the current track heading.North up—sets the top of the radar display to a north heading.Course up—sets the radar display so the direction of navigation is always up. The headingline appears vertically on the screen if it is shown.Heading line—shows or hides a line in the direction of travel.Rings—shows or hides the radar range rings.look-Ahd spd—adjusts your location toward the bottom of the screen as your speed increases. Thespeed entered is the speed at which the maximum position shift occurs, so enter your expected topspeed for best results.Timed Xmit—sets and customizes a transmit/standby cycle. Define the transmission time(Xmit Time) and standby time (stdby Time) in minutes.Xtalk Reject (Crosstalk)—filters out interference caused by another radar operating in closeproximity.Advanced—opens a menu of advanced settings:FTC (fast time constant)— controls unwanted screen clutter caused by rain at a distance. Setto High, Medium, Low, or Off.Front of Boat—sets the offset of the front of the boat if you mount the radar at an angle.Antenna size (GMR 404/406 only)—selects the size of your antenna. Touch 4 Foot if youhave a GMR 404; touch 6 foot if you have a GMR 406.Motor speed (GMR 404/406 only)—sets the motor speed of your GMR 404/406. Touch HighSpeed to increase the speed at which the radar rotates, which also increases the speed at whichthe screen updates.•••••••