Cirrus Perspective™ by Garmin – Pilot’s Guide for the SR20/SR22/SR22T 190-00820-08 Rev. A238FLIGHT MANAGEMENTSYSTEMOVERVIEWFLIGHTINSTRUMENTSEISAUDIO PANEL& CNSFLIGHTMANAGEMENTHAZARDAVOIDANCEAFCSADDITIONALFEATURESAPPENDICESINDEXChanging a stored flight plan comment:1) Press the FPL Key to display the Active Flight Plan Page.2) Turn the small FMS Knob clockwise to display the Flight Plan Catalog Page.3) Press the FMS Knob to activate the cursor and turn the FMS Knob to highlight the flight plan to be edited.4) Press the EDIT Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the ENT Key. The StoredFlight Plan Page is displayed.5) Turn the large FMS Knob to highlight the comment field.6) Use the FMS Knobs to edit the comment.7) Press the ENT Key to accept the changes.8) Press the FMS Knob to remove the flashing cursor.ALONG TRACK OFFSETSA waypoint having an “along track offset” distance from an existing waypoint can be entered into a flight plan.Along track offset waypoints lie along the path of the existing flight plan, and can be used to make the systemreach a specified altitude before or after reaching the specified flight plan waypoint. Offset distances can beentered from 1 to 99 nm in increments of 1 nm. Entering a negative offset distance results in an along trackoffset waypoint inserted before the selected waypoint, whereas entering a positive offset distance results in analong track offset waypoint inserted after the selected waypoint. Multiple offset waypoints are allowed.A waypoint must be adjacent to its parent waypoint in the flight plan, so the system limits the along-trackdistance to less than the length of the leg before or after the selected waypoint. If the selected waypoint is theactive waypoint, the distance is limited to less than the distance to go to the active waypoint. Assigning an alongtrack offset to a leg with indeterminate length is not permitted. An along track offset is not allowed at or afterthe final approach fix of an approach.An along track offset distance cannot be modified once entered. If the along track offset distance must bechanged, the existing along track offset waypoint must be deleted and a new one created with the new offsetdistance.
