190-00820-08 Rev. A Cirrus Perspective™ by Garmin – Pilot’s Guide for the SR20/SR22SR22T 373HAZARD AVOIDANCESYSTEMOVERVIEW FLIGHTINSTRUMENTS EIS AUDIO PANEL& CNS FLIGHTMANAGEMENT HAZARDAVOIDANCE AFCS ADDITIONALFEATURES APPENDICES INDEXAdditional information about obstacles can be displayed by panning over the display on the map. The mappanning feature is enabled by pressing the RANGE Knob. The map range is adjusted by turning the RANGEKnob. If the map range is adjusted while panning is enabled, the map is re-centered on the Map Pointer.Figure 6-93 Terrain Information on the Navigation Map PageAdditionalInformation onObstacle Selectedwith Map PointerYellow Terrain Area(Between 100’ and1000’ Below AircraftAltitude)Red LightedObstacles(Above or Within100’ BelowAircraft Altitude)Lighted ObstacleSelected with MapPointerTerrain LegendTerrain DisplayEnabled IconRed Terrain Area(Above or Within100’ BelowAircraft Altitude)TERRAIN PROXIMITY PAGEThe Terrain Proximity Page is specialized to show terrain and obstacle data in relation to the aircraft’s currentaltitude, without clutter from the basemap. Aviation data (airports, VORs, and other NAVAIDs) can be displayedfor reference.Aircraft orientation on this map is always heading up unless there is no valid heading. Two views are availablerelative to the position of the aircraft: the 360° default display and the radar-like ARC (120°) display. Map rangeis adjustable with the RANGE Knob from 1 to 200 nm, as indicated by the map range rings (or arcs).Displaying the Terrain Proximity Page:1) Turn the large FMS Knob to select the Map Page Group.2) Turn the small FMS Knob to select the Terrain Proximity Page.3) To change the view,a) Press the VIEW Softkey.b) Press the 360 or ARC Softkey to select the desired view.Or:a) Press the MENU Key.
