Garmin EDGE 530 Owner's Manual

Also see for EDGE 530: User manual Owner's manual

Garmin EDGE 530 Owner's Manual Manual pdf 23 page image

2 Twist the cover counter-clockwise until the cover is looseenough to remove.3 Remove the cover and the battery .4 Wait 30 seconds.5 Insert the new battery into the cover, observing polarity.NOTE: Do not damage or lose the O-ring gasket.6 Twist the cover clockwise so that the marker on the coveraligns with the marker on the case.NOTE: The LED flashes red and green for a few secondsafter battery replacement. When the LED flashes green andthen stops flashing, the device is active and ready to senddata.Replacing the Cadence Sensor BatteryThe device uses one CR2032 battery. The LED flashes red toindicate a low battery level after two revolutions.1 Locate the circular battery cover on the back of thesensor.2 Twist the cover counter-clockwise until the marker points tounlocked and the cover is loose enough to remove.3 Remove the cover and the battery .4 Wait 30 seconds.5 Insert the new battery into the cover, observing polarity.NOTE: Do not damage or lose the O-ring gasket.6 Twist the cover clockwise until the marker points to locked.NOTE: The LED flashes red and green for a few secondsafter battery replacement. When the LED flashes green andthen stops flashing, the device is active and ready to senddata.TroubleshootingResetting the DeviceIf the device stops responding, you may need to reset it. Thisdoes not erase any of your data or settings.Hold for 10 seconds.The device resets and turns on.Restoring the Default SettingsYou can restore the default configuration settings and activityprofiles. This will not remove your history or activity data, suchas rides, workouts, and courses.Select Menu > Settings > System > Device Reset > ResetDefault Settings > OK.Clearing User Data and SettingsYou can clear all user data and restore the device to its initialsetup. This removes your history and data, such as rides,workouts, and courses, and resets the device settings andactivity profiles. This will not remove any files you added to thedevice from your computer.Select Menu > Settings > System > Device Reset > DeleteData and Reset Settings > OK.Maximizing Battery Life• Turn on Battery Save Mode (Turning On Battery SaveMode, page 19).• Decrease the backlight brightness (Using the Backlight,page 3) or shorten the backlight timeout (Display Settings,page 17).• Select the Smart recording interval (Data Recording Settings,page 17).• Turn on the Auto Sleep feature (Using Auto Sleep, page 17).• Turn off the Bluetooth wireless feature (Phone Settings,page 17).• Select the GPS setting (Changing the Satellite Setting,page 16).• Remove wireless sensors that you no longer use.Turning On Battery Save ModeBattery save mode adjusts the settings automatically to extendthe battery life for longer rides. During an activity, the screenturns off. You can enable automatic alerts and tap the screen towake it up. Battery save mode records GPS track points andsensor data less frequently. Speed, distance, and track dataaccuracy are reduced.NOTE: History is recorded in battery save mode when the timeris running.1 Select Menu > Settings > Battery Save Mode > Enable.2 Select the alerts that wake up the screen during an activity.My phone will not connect to the deviceIf your phone will not connect to the device, you can try thesetips.• Turn off your smartphone and your device, and turn themback on again.• Enable Bluetooth technology on your smartphone.• Update the Garmin Connect app to the latest version.• Remove your device from the Garmin Connect app to retrythe pairing process.If you are using an Apple device, you should also removeyour device from the Bluetooth settings on your smartphone.• Bring your smartphone within 10 m (33 ft.) of the device.Troubleshooting 19