Garmin Edge 1000 Owner's Manual

Also see for Edge 1000: Quick start manual Owner's manual Quick start manual Quick guide

Garmin Edge 1000 Owner's Manual Manual pdf 15 page image

Deleting FilesNOTICEIf you do not know the purpose of a file, do not delete it. Yourdevice memory contains important system files that should notbe deleted.1 Open the Garmin drive or volume.2 If necessary, open a folder or volume.3 Select a file.4 Press the Delete key on your keyboard.Disconnecting the USB CableIf your device is connected to your computer as a removabledrive or volume, you must safely disconnect your device fromyour computer to avoid data loss. If your device is connected toyour Windows computer as a portable device, it is not necessaryto safely disconnect.1 Complete an action:• For Windows computers, select the Safely RemoveHardware icon in the system tray, and select your device.• For Mac computers, drag the volume icon to the trash.2 Disconnect the cable from your computer.NavigationNavigation features and settings also apply to navigatingcourses (Courses, page 4) and segments (Segments, page 5).• Locations and finding places (Locations, page 11)• Planning a route (Planning and Riding a Route, page 12)• Route settings (Route Settings, page 12)• Optional maps (Purchasing Additional Maps, page 13)• Map settings (Map Settings, page 12)LocationsYou can record and store locations in the device.Saving Your LocationYou can save your present location, such as your home orparking spot.1 From the home screen, select the status bar or swipe downfrom the top of the page.The connections page appears.2 Select GPS > Mark Location > .Saving Locations from the Map1 From the home screen, select Where To? > > A MapPoint.2 Browse the map for the location.3 Select the location.Location information appears at the top of the map.4 Select the location information.5 Select > .Navigating to a Location1 From the home screen, select Where To?.2 Select an option:• Select Saved to navigate to a saved course, location, orsegment.• Select Recent Finds to navigate to one of the last 50locations you have found.• Select Search Tools to navigate to a point of interest orspecific address (requires routable maps), or a city,intersection, or known coordinates.• Select to narrow your search area.3 If necessary, select to enter specific search information.4 Select a location.5 Select RIDE.6 Follow the on-screen instructions to your destination.Navigating to Known Coordinates1 From the home screen, select Where To? > Search Tools >Coordinates.2 Enter the coordinates, and select .3 Follow the on-screen instructions to your destination.Navigating Back to StartAt any point during your ride, you can return to the starting point.1 Go for a ride (Going for a Ride, page 3).2 During your ride, select anywhere on the screen to view thetimer overlay.3 Select > Where To? > Back to Start.4 Select Along Same Route or Most Direct Route.5 Select RIDE.The device navigates you back to the starting point of yourride.Stopping Navigation1 Select anywhere on the screen to view the timer overlay.2 Scroll to the map.3 Select > .Projecting a LocationYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 From the home screen, select Where To? > Saved >Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Project Location.5 Enter the bearing and distance to the projected location.6 Select .Editing Locations1 From the home screen, select Where To? > Saved >Locations.2 Select a location.3 Select the information bar at the top of the screen.4 Select .5 Select an attribute.For example, select Change Elevation to enter a knownaltitude for the location.6 Enter the new information, and select .Navigation 11