Garmin Edge 1000 Owner's Manual

Also see for Edge 1000: Quick start manual Owner's manual Quick start manual Quick guide

Garmin Edge 1000 Owner's Manual Manual pdf 16 page image

Deleting a Location1 From the home screen, select Where To? > Saved >Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Delete Location > .Planning and Riding a RouteYou can create and ride a custom route. A route is a sequenceof waypoints or locations that leads you to your final destination.1 From the home screen, select Where To? > Route Planner> Add First Location.2 Select an option:• To select your current location on the map, select CurrentLocation.• To select a saved location, select Saved, and select alocation, course, or segment.• To select a location for which you recently searched,select Recent Finds, and select a location.• To select a location on the map, select Use Map, andselect a location.• To browse for and select a point of interest, select POICategories, and select a nearby point of interest.• To select a city, select Cities, and select a nearby city.• To select an address, select Address, and enter theaddress.• To select an intersection, select Intersections, and enterthe street names.• To use coordinates, select Coordinates, and enter thecoordinates.3 Select Use.4 Select Add Next Location.5 Repeat steps 2–4 until you have selected all locations for theroute.6 Select View Route.The device calculates your route, and a map of the routeappears.TIP: You can select to view an elevation plot of the route.7 Select RIDE.Creating a Round-Trip RouteThe device can create a round-trip route based on a specifieddistance and a starting location.1 From the home screen, select Where To? > Round-TripRouting.2 Select Distance, and enter the total distance for the route.3 Select Start Location.4 Select an option:• Select Current Location.NOTE: If the device cannot acquire satellite signals todetermine your current location, the device prompts you touse the last known location or to select the location on themap.• Select Use Map to select a location on the map.5 Select Search.TIP: You can select to search again.6 Select a route to view it on the map.TIP: You can select and to view the other routes.7 Select RIDE.Route SettingsSelect > Activity Profiles, select a profile, and selectNavigation > Routing.Routing Mode: Allows you to select an activity for the device tocalculate your route (Selecting an Activity for RouteCalculation, page 12).Calculation Method: Allows you to select the calculationmethod to optimize your route.Lock on Road (requires routable maps): Locks the positionicon, which represents your position on the map, onto thenearest road.Avoidance Setup (requires routable maps): Allows you toselect the road type you want to avoid.Recalculation (requires routable maps): Allows you to selectthe recalculation method when you deviate from the route.Selecting an Activity for Route CalculationYou can set the device to calculate the route based on activitytype.1 From the home screen, select > Activity Profiles.2 Select a profile.3 Select Navigation > Routing > Routing Mode.4 Select an option to calculate your route.For example, you can select Tour Cycling for on-roadnavigation or Mountain Biking for off-road navigation.Map SettingsSelect > Activity Profiles, select a profile, and selectNavigation > Map.Orientation: Sets how the map is shown on the page.Auto Zoom: Automatically selects a zoom level for the map.When Off is selected, you must zoom in or out manually.Guide Text: Sets when the turn-by-turn navigation prompts areshown (requires routable maps).Map Visibility: Allows you to set advanced map features.Map Information: Enables or disables the maps currentlyloaded on the device.Changing the Map Orientation1 Select > Activity Profiles.2 Select a profile.3 Select Navigation > Map > Orientation.4 Select an option:• Select North Up to show north at the top of the page.• Select Track Up to show your current direction of travel atthe top of the page.• Select 3D Mode to display the map in three dimensions.Advanced Map SettingsSelect > Activity Profiles, select a profile, and selectNavigation > Map > Map Visibility.Map Visibility Mode: Auto and High Contrast have presetvalues. You can choose Custom to set each value.Zoom Levels: Sets map items to draw or appear at or below theselected zoom level.Text Size: Sets the text size for map items.Detail: Sets the amount of detail shown on the map. Showingmore detail may cause the map to redraw more slowly.Shaded Relief: Shows detail relief on the map (if available) orturns off shading.12 Navigation