Garmin G1000 Cockpit Reference Guide for the Beechcraft A36/G36 9-1SECTION 9 – PROCEDURESSECTION 9: PROCEDURES9.1 ARRIVALS AND DEPARTURESLoad and Activate a Departure Procedure1) With the Navigation Map Page displayed, pressthe FPL Key.2) Press the LD DP Softkey. If a flight plan is active,the departure airport will be displayed as thedefault. A list of available departures is alsodisplayed.3) If no flight plan is active, use the FMS Knobsto enter the identifier of the desired airport.Press the ENT Key.4) Turn the large FMS Knob to highlight theDeparture field. Turn the small FMS Knob todisplay a list of available departures.5) Turn either FMS Knob to select the desireddeparture and press the ENT Key.Figure 9-1 Select Departure6) A list of runways may be displayed for thedeparture. Turn either FMS Knob to select thedesired runway and press the ENT Key.7) A list of available transitions is displayed for thedeparture. Turn either FMS Knob to highlightthe desired transition waypoint and press theENT Key.Figure 9-2 Select Departure Transition8) With ‘LOAD?’ highlighted, press the ENT Key.The departure will be active when the flightplan is active.Load and Activate An Arrival Procedure1) With the Navigation Map Page displayed, pressthe FPL Key.2) Press the LD STAR Softkey. If a flight plan isactive, the destination airport will be displayedas the default. A list of available arrivals is alsodisplayed.3) If no flight plan is active, use the FMS Knobsto enter the identifier of the desired airport.Press the ENT Key.4) Turn the large FMS Knob to highlight the Arrivalfield. Turn the small FMS Knob to display a listof available arrivals.5) Turn either FMS Knob to select the desiredarrival and press the ENT Key.Figure 9-3 Select Arrival
