Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG 190-00963-02 Rev. C2Flight InstrumentsFlightInstrumentsEISNav/Com/XPDR/AudioAFCSGPS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndexENABLE/DISABLE OBS MODE WHILE NAVIGATING WITH GPS1) Press the OBS Softkey to select OBS Mode.2) Turn a CRS Knob to select the desired course to/from the waypoint. Press aCRS Knob to synchronize the Selected Course with the bearing to the nextwaypoint.3) Press the OBS Softkey again to disable OBS Mode.GENERIC TIMER1) Press the TMR/REF Softkey, then turn the large FMS Knob to select thetime field (hh/mm/ss). Turn the FMS Knobs to set the desired time, thenpress the ENT Key. The UP/DOWN field is now highlighted.2) Turn the small FMS Knob to display the UP/DOWN window. Turn the FMSKnob to select ‘UP’ or ‘DOWN’, then press the ENT Key. ‘START?’ is nowhighlighted.3) Press the ENT Key to START, STOP, or RESET the timer (if the timer iscounting DOWN, it starts counting UP after reaching zero). Press the CLRKey or the TMR/REF Softkey to remove the window.CONFIGURE VSPEED BUGS1) Press the TMR/REF Softkey.2) Turn the large FMS Knob to highlight the desired Vspeed.3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when aspeed has been changed from a default value, an asterisk appears next tothe speed).4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFFfield.5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.6) To remove the window, press the CLR Key or the TMR/REF Softkey.
