Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG190-00963-02 Rev. C33Flight PlanningFlightInstruments EISNav/Com/XPDR/Audio AFCS GPS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index5) Press the DELETE Softkey. A ‘Delete flight plan #?’ confirmation window isdisplayed.6) With ‘OK’ highlighted, press the ENT Key to delete the flight plan. To cancel,turn the large FMS Knob to highlight ‘CANCEL’ and press the ENT Key.GRAPHICAL FLIGHT PLAN CREATION1) Press the FPL Key to display the Active Flight Plan Page on the MFD.2) Press the Joystick to activate the map pointer. Use the Joystick to movethe pointer to the desired point on the map to be inserted as a waypoint inthe flight plan.3) The default insertion point is at the end of the flight plan. If the selectedwaypoint is to be placed anywhere other than the end of the flight plan,press the FMS Knob to activate the cursor. Waypoints are insertedABOVEthe cursor. Turn the large FMS Knob to select the desired insertion point.4) Press the LD WPT Softkey. The selected waypoint is inserted at the selectedpoint. The default user waypoint naming is USR000, USR001, USR002, andso on.5) To change the user waypoint name, follow the procedure for modifying a userwaypoint.EXPORT A FLIGHT PLAN TO AN SD CARD1) Insert the SD card into the top card slot on the MFD.2) Press the FPL Key on the Contol Unit to display the Active Flight Plan Pageon the MFD.3) Turn the small FMS Knob to select the Flight Plan Catalog Page.4) Press the FMS Knob to activate the cursor.5) Turn the large FMS Knob to highlight the flight plan to be exported.6) Select the EXPORT Softkey.7) Press the ENT Key to confirm the export.
