Garmin G1000 Cockpit Reference Guide for Cessna Nav III82SECTION 5 – MFD5.8 MULTI FUNCTION WINDOWThe central area of the MFD contains the Multi Func-tion window, which displays the GPS/Navigation flightinformation.Multi Function Window Page GroupsThis guide only describes the Map Page Group, for thisis the group typically used during most flight operations.The G1000 Multi Function Display Pilot’s Guide describesthe remaining page groups in detail.The Multi Function window of the MFD displays in-formation from four main page groups:• Map (MAP) – three pages• Waypoint (WPT) – five pages• Auxiliary (AUX) – five pages• Nearest (NRST) – seven pagesTo select a specific page group:1. Turn the large FMS knob until the desired pagegroup is selected.To select a different page within the group:1. Turn the small right FMS knob. As the largeknob is turned, the bottom right corner of eachpage indicates the page group that is currentlybeing displayed (e.g., MAP or NRST, etc.), thenumber of pages available within that group(indicated by rectangle icons) and the place-ment of the current page within that group(indicated by a solid icon).The following keys which are used in association withall page group operations:• CLR – Erases information or cancels an entry. Pressand hold CLR to immediately display the DefaultNavigation Map Page, regardless of the page cur-rently displayed.• ENT – Accepts a menu selection or data entry.Approves an operation or completes data entry.Also, confirms information.• MENU – Displays a context-sensitive list of optionsthat allows access to additional features or thatallows the pilot to change the settings which relateto the currently displayed page.• BACK Softkey – Resets the MFD softkeys to thetop softkey level.• DCLTR Softkey – With each key-press, removesinformation from the moving map in a progressivemanner.
