190-00709-00 Rev. A Garmin G1000 Pilot’s Guide for the Socata TBM 850 5-3FLIGHT MANAGEMENTNAVIGATION STATUS BOXThe Navigation Status Box located at the top of the PFD contains two fields displaying the followinginformation:PFD Navigation Status Box• Active flight plan leg (e.g., ‘D-> KICT’ or ‘KIXD -> KCOS’) or flight plan annunciations (e.g., ‘Turnright to 021˚ in 8 seconds’)• Distance (DIS) and Bearing (BRG) to the nextwaypoint or flight plan annunciations (e.g., ‘TODwithin 1 minute’)The symbols used in the PFD status bar are:Symbol DescriptionActive LegDirect-toRight Procedure TurnLeft Procedure TurnRight Holding PatternLeft Holding PatternVector to FinalRight DME ArcLeft DME ArcThe Navigation Status Box located at the top of theMFD contains four data fields, each displaying one ofthe following items:• Bearing (BRG)• Distance (DIS)• Desired Track (DTK)• Endurance (END)• Enroute Safe Altitude (ESA)• Estimated Time of Arrival (ETA)• Estimated Time Enroute (ETE)• Fuel on Board (FOB)• Fuel over Destination (FOD)• Ground Speed (GS)• Minimum Safe Altitude (MSA)• True Air Speed (TAS)• Track Angle Error (TKE)• Track (TRK)• Vertical Speed Required (VSR)• Crosstrack Error (XTK)MFD Navigation Status BoxThe navigation information displayed in the four data fields can be selected on the MFD Data Bar Fields Boxon the AUX - System Setup Page. The default selections (in order left to right) are GS, DTK, TRK, and ETE.Changing a field in the MFD Navigation Status Box:1) Select the System Setup Page.2) Press the FMS Knob momentarily to activate the flashing cursor.3) Turn the large FMS Knob to highlight the desired field number in the MFD Data Bar Fields Box.
