Garmin G1000 Pilot’s Guide for the Socata TBM 850 190-00709-00 Rev. A5-26FLIGHT MANAGEMENTThe following range items are configurable on the airways menu:Airway Type Symbol DefaultRange (nm)MaximumRange (nm)Low Altitude Airway (LOW ALT AIRWAY) 200 500High Altitude Airway (HI ALT AIRWAY) 300 500Table 5-4 Airway Range InformationTRACK VECTORThe Navigation Map can display a track vector that is useful in minimizing track angle error. The track vectoris a dashed light blue line segment with an arrowhead attached to the end, extended to a predicted locationalong the current aircraft track. The track vector look-ahead time is selectable (30 sec, 60 sec (default), 2 min,5 min, 10 min, 20 min) and determines the length of the track vector. The arrowhead is continuously pointingto the predicted aircraft location.Figure 5-24 Navigation Map -Track VectorTrack VectorDisplaying/removing the track vector:1) Press the MENU Key with the Navigation Map Page displayed. The cursor flashes on the ‘Map Setup’ option.2) Press the ENT Key. The Map Setup Menu is displayed.3) Select the ‘Map’ group.4) Press the ENT Key.5) Highlight the ‘TRACK VECTOR’ field.6) Select ‘On’ or ‘Off’. Press the ENT Key to accept the selected option. The flashing cursor highlights the lookahead time field. Use the FMS Knob to select the desired time. Press the ENT Key.7) Press the FMS Knob to return to the Navigation Map Page.
