Garmin G1000 Pilot’s Guide for the Socata TBM 850 190-00709-00 Rev. AB-2APPENDIX B4) After the update completes, the PFD starts in normal mode.5) Turn the G1000 System OFF and remove the SD card.6) Repeat steps 1 through 4 for the other PFD and the MFD. The MFD and PFD databases are now updated.Remove the SD card when finished.7) Verify that the correct update cycle is loaded during startup of the MFD.GARMIN DATABASESThe following G1000 databases are stored on Supplemental Data Cards provided by Garmin:• Expanded basemap• Terrain• Airport terrain• Obstacle• SafeTaxi• FliteChartsAfter subscribing to the desired database product, these database products will be downloaded to threeSupplemental Data Cards (with the exception of FliteCharts, which is loaded on only one card). Insert eachSupplemental Data Card into the correct location shown in Figure B-3. These cards must not be removedexcept to update the databases stored on each card.Figure B-3 Correct Database LocationsMFDPFD1 PFD2Since these databases are not stored internally in the MFD or PFD, a Supplemental Data Card containingidentical database versions must be kept in each display unit.The basemap database contains data for the topography and land features, such as rivers, lakes, and towns.It is updated only periodically, with no set schedule. There is no expiration date.The terrain and airport terrain databases contain the terrain mapping and airport diagram data. They areupdated periodically and have no expiration date.
