Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240 190-01264-01 Rev. A2Flight InstrumentsFlightInstrumentsEISNav/Com/XPDR/AudioAFCSFMS NavFlightPlanningProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/AlertsAppendixIndexDISPLAYING SELECTED ALTITUDE IN METERS1) Press the PFD Settings Softkey on the PFD to display the second-levelsoftkeys.2) Press the Other PFD Settings Softkey.3) Press the Altitude Units Softkey.4) Press the Meters Softkey to turn on metric altitude readouts.5) Press the Back Softkey to return to the previous level of softkeys.SETTING THE BARO TRANSITION ALERT1) From the Home Screen on the Touchscreen Controller, touch Utilities >Setup > Avionics Settings.2) Touch the Alerts Tab.• To turn the alert on or off, touch the Baro Transition Alert EnableButton. An illuminated green line below “Enable” indicates that the alert ison.• To set or change the Baro Transition Alert Altitude, touch the BaroTransition Alert Data Field. Enter the desired altitude on the keypad, andtouch Enter.CHANGE NAVIGATION SOURCES1) Press the Active Nav Softkey on the PFD to change from FMS to VOR1 orLOC1.2) Press the Active Nav Softkey again to change from VOR1 or LOC1 toVOR2 or LOC2.3) Press the Active Nav Softkey a third time to return to FMS.CHANGING THE SELECTED GPS CDI SETTING1) From the Home Screen on the Touchscreen Controller, touch Utilities >Setup > Avionics Settings.2) Touch the System Tab.3) Touch the GPS CDI Data Field.4) Touch desired setting (2.00 NM, 1.00 NM, 0.30 NM, or AUTO).
