Garmin G2000 Cockpit Reference Guide for the Cessna Corvalis T240190-01264-01 Rev. AAppendix165FlightInstruments EISNav/Com/XPDR/Audio AFCS FMS NavFlightPlanning ProceduresHazardAvoidanceAdditionalFeaturesAbnormalOperationAnnun/Alerts Appendix Index8) Press the NO Softkey. The display now starts in normal mode. Since thedatabase effective date is not yet valid, it should not be loaded as theactive database. The display now starts in normal mode. Do not removepower while the display is starting.9) Press any key to acknowledge the startup screen.10) From the Home Screen on the Touchscreen Controller, touch Utilities > Setup> Avionics Status.11) If necessary, touch the Database Tab. The Touchscreen Controller shows a listof displays on which databases reside.12) The new database is copied to the SD card in the bottom card slot ofthe PFD. While the database is copying, progress can be monitored at thebottom of the applicable database field. When copying is finished, ‘SyncComplete’ is displayed.13) Turn system power OFF.14) Remove the SD card from the top card slot of the MFD.15) Apply power to the system.16) From the Home Screen on the Touchscreen Controller, touch Utilities > Setup> Avionics Status.17) If necessary, touch the Database Tab. The Touchscreen Controller shows a listof displays on which databases reside.18) Touch a button from the list to view database information associated with thatdisplay (MFD1, PFD1, and GTC1).19) Scroll through the database information and verify the standby navigationdatabase cycle information is correct.20) Touch Back to return to the list of displays, and repeat steps 17 through 19 toverify the standby navigation cycle information for each display.21) When finished, touch Back or Home.AUTOMATIC DATABASE SYNCHRONIZATION FEATUREWhen updating the active navigation database, the automatic databasesynchronization feature automatically transfers the navigation database from a singleSD Card to the internal memory of all GDUs and GTCs. When updating all otherdatabases (including the standby navigation database) the data is transferred froma single SD card to the remaining SD cards on each GDU, as well as the internal
